Product Information
Samsung HD204UI 2TB Spin Point F4 SATA Hard Drive, 32MB Cache, 5400RPM - OEM
EAN: 4016138653649, 5052179846106, 8808993861576
While other 2TB drives split their collection of bytes over four 500GB platters, Samsung's Spinpoint EcoGreen HD204UI F4 features three 667GB disks. This means the new platters boast the world's highest areal density at the moment.
The 3.5-inch F4 is intended to replace Samsung's four-platter F3 drive, and has otherwise similar specs. The drive is bolstered by a 32MB buffer, and the platters spin at 5400rpm, rather than the 7200rpm rotational speed of some other 2TB desktop drives
The new three-platter drive also cuts down on power consumption. The F4 eats 23 per cent less electricity in standby mode than its predecessor. The drive will remain quiet while it's ticking away, taking advantage of the company's SilentSeek and NoiseGuard technologies. The new Spinpoint HD204UI F4EG also supports Native Command Queuing
Key Features:
- 667GB Formatted Capacity Per Disk
- Serial ATA 3.0Gbps Interface Support
- Improved recording stability over temperature with PMR
- Advanced dynamic FOD control for best data integrity
- Intelligent compensation of external disturbance
- SATA Native Command Queuing Feature Device Initiated SATA Power Management
- Shock & Rotational vibration sensor
- Environment friendly product with RoHS compliance
- Improved performance with dual-ARM based firmware
- ATA S.M.A.R.T. Compliant
- ATA Automatic Acoustic Management Feature
- ATA 48-bit Address Feature
- ATA Device Configuration Overlay Feature
- NoiseGuard
- SilentSeek
SPECIFICATION:
Drive Configurations:
Capacity = 2TB
Interface = Serial ATA 3.0Gbps
Buffer Size = 32 MB
Byte per Sector = 4K Sector with Emulation
Performance Specifications:
Average Seek time = 8.9 ms
Data Transfer Rate / Media to/from Buffer = 250MB/sec
Data Transfer Rate / Buffer to/from Host = 300MB/sec
Average Latency = 5.52 ms
Drive Ready Time = 13 sec
Reliability Specifications:
Non-recoverable Read Error = 1 sector in 1015bits
Acoustics:
Idle = 2.5/2.6 Bel
Performance Seek = 2.8/2.9 Bel
Environmental Specifications
Temperature / Operating = 0 - 60 C
Temperature / Non-operating = -40 - 70 C
Humidity(non-condensing) / Operating = 5 - 95 %
Humidity(non-condensing) / Non-operating = 5 - 95 %
Liner Shock(1/2 sine pulse) / Operating = 70 G
Liner Shock(1/2 sine pulse) / Non-operating = 300 G
Altitude(relative to sea level) / Operating = -1,000 to 10,000 ft
Altitude(relative to sea level) / Non-operating = -1,000 to 40,000 ft
Power Requirements:
Voltage = +5V +/- 5%, +12V +/- 10%
Spin-up Current = 2.0A
Seek = 5.7W
Read/Write = 6.3W
Idle = 5.1W
Standby = 1W
Sleep = 1W
Physical Dimension:
Height = 26.1 mm
Width =101.6 mm
Length = 147.0 mm
Weight = 650g
|
login/register
your account 
questions 
contact us
